Universal Hydrophilic Syringe Filters: Millex ® Hydrophilic PTFE Polytetrafluoroethylene (PTFE) is widely used in membrane filters due to its high chemical resistance and low protein binding. However, the native hydrophobicity of unmodified PTFE restricts its use to the filtration of organic solvents and solutions.

Membrane: HPLC Certified PTFE, with Polypropylene Support . Description. Titan3 PTFE (Hydrophobic) Syringe Filter 0.2 µm, 17 mm, 200 Pk. Material. PTFE (Hydrophobic) Pore Size. 0.2 μm. For Use With (Application) Sample Filtration: aggressive organic, highly basic, or hot solutions, transducer protectors; aqueous solutions after prewetting

As well as being suitable for the filtration of organic solvents in applications such as HPLC and UHPLC sample preparation, the hydrophobic nature of the PTFE membrane makes these syringe filters ideal to use in gas filtration or as a moisture barrier in venting applications. 25 mm Standard Acrodisc Syringe Filters Type Syringe Filters Use

Economic Choice Syringe Filters are available in a variety of sizes and membrane types to meet any application need. Specifications. Membrane: HPLC certified PTFE, w/polypropylene support; Maximum operating temperature: 110 °C; Housing: Medical grade, virgin polypropylene; Autoclave: Sterilize by dry heat at 121 °C for 15 minutes; Applications

systems. Acrodisc PSF syringe filters are fully compatible for use with SOTAX and Zymark automated workstations and facilitate smooth operation and worry-free performance 24 hours a day. HPLC Certified Pall Life Sciences certifies Acrodisc PSF syringe filters with PTFE, nylon, PVDF, and GHP membrane to be low in UV absorbing extractables.

Pall non-sterile syringe filters with PTFE membrane are ideal for use in the filtration of gas or organic solvents. PTFE syringe filters have been widely used for the sample preparation applications, removing particulate contamination and protecting HPLC systems and columns. Overview Order Products Description Documents Applications Specifications

hydrophobic nature, PTFE filters can be utilized as a moisture barrier in venting applications. PTFE membranes require pre-treatment with alcohol before being suitable for aqueous or high aqueous/organic samples. Do not use directly with aqueous solutions. Specifications Membrane: HPLC certified PTFE, w/polypropylene support

mdi PTFE membrane syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand pressure and Related Products: Solvent Membrane Filter Compare this item

The smaller conventional Corning® syringe disc-type filters (4, 15, 25, 26, and 28 mm diameter) are used with syringes which serves as both the fluid reservoir and the pressure source. They are 100% integrity tested. The HPLC-certified non-sterile syringe filters are available with nylon, regenerated

The ptfe 50mm Acrodisc hydrophobic filter with hose barbs can be used to sterilize non-aqueous solutions, vacuum line protection, venting and gas filtration. Hose barb end allows easy secure attachment of silicone tubing or other types of tubing. The filter is non sterile and is autoclavable. Do not Compare this item

Titan3 Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Membrane: HPLC Certified PTFE, with Polypropylene Support . Color: Transparent Yellow: Description: Titan3 PTFE (Hydrophobic) Syringe Filter 0.45 µm, 30 mm, with Pre-Filter, 100 Pk. Disposable: Yes: Material: PTFE (Hydrophilic) Material (Membrane) PTFE

HPLC Certification Pall Life Sciences certifies the following HPLC Acrodisc syringe filters have been tested for compatibility with common HPLC solvents using established HPLC procedures. To verify low levels of UV-detectable extractables, representative samples are tested using a highly sensitive HPLC technique.

PTFE, polyvinylidene difluoride (PVDF), and RC are compatible with a wide range of solvents commonly used in HPLC while remaining low in extractables. We have compiled compatibility tables listing material resistance to common solvents, making them useful for quick reference.

Membrane: HPLC certified PTFE, w/polypropylene support Maximum operating temperature: 110 °C Housing: Medical grade, virgin polypropylene Autoclave: Sterilize by dry heat at 121 °C for 15 minutes Applications HPLC and organic-solvent sample preparation and clean-up Dissolution sample analysis General sample preparation

Economic Choice Syringe Filters are available in a variety of sizes and membrane types to meet any application need. Specifications Membrane: HPLC certified PTFE, w/polypropylene support Maximum operating temperature: 110 °C Housing: Medical grade, virgin polypropylene Autoclave: Sterilize by dry heat at 121 °C for 15 minutes Applications