Silicone septa for lab equipment ratings
Home » News » GL45 Square Bottle » Silicone septa for lab equipment ratings
Silicone septa for lab equipment ratings
Septa Selection Guide – Aijiren Tech Scientific Septa selection guide Overview Diferent septa material for LC and GC applications There are many diferent types of materials used to produce t...
Share With:
Product Introduction
Product Introduction

Septa Selection Guide - Aijiren Tech Scientific

Septa selection guide Overview Diferent septa material for LC and GC applications There are many diferent types of materials used to produce the septa found in LC and GC vial caps. This document will provide you with the technical guidance you need in order to make the right selection. Choosing the right septa

Septa selection guide

the solvent. PTFE/Silicone septa are ideal for use in most HPLC and GC applications where resealability and purity are critical. Pre-slit PTFE/silicone septa Pre-slit septa are offered in many of the same formulations as for non-slit PTFE/silicone septa and shares most of the physical and chemical characteristics. The septum is provided with a

Shop PTFE / Silicone Septum | 100/pk | wat058874 | Aijiren Technology

When it’s time for sample injection, you can trust the PTFE/Silicone Septum from Aijiren Technology to help you perform that process successfully. Our septa are held to a high standard of cleanliness and dimensional tolerances, as we believe you should only receive the cleanest products from us right out of the box. Tell your lab manager that you need

Amazon Best Sellers: Best Lab Autosampler Vials

1 offer from $17.99. #22. 2mL Autosampler Vials 100PCS, 9-425 HPLC, Lab Clear Vials with Writing Area and Graduations, Screw Cap, White PTFE & Red Silicone Septa. 1 offer from $18.99. #23. PEKYBIO 2ML Autosampler Vial, Clear 8-425 HPLC, 8mm Chromatography Lab Vial with Writing Area, Black Screw Cap&Septa, 100pcs.

Blue Polyethylene Screw Neck Cap | 12 x 32mm - Aijiren Technology Corporation

This includes ensuring that the cap is free of any potential contaminants that may cause chromatographic ghost peaks. These caps come 100 to a pack with 12 x 32 mm measurements, and other related products are available when you shop for lab equipment with Aijiren Technology, such as the Amber Glass 12 x 32 mm Screw Neck Vial, 2 mL Volume, 100/pk.

Septa Selection Tool | Aijiren Tech Scientific - US

Silicone rubber septa. High quality, silicone rubber laminated to PTFE. Use when excellent resealing qualities are a must. Septum resists coring and is recommended when multiple injections are required. Preferred septa for use in liquid chromatography applications.

Stoppers | Aijiren Tech Scientific

Stoppers, also known as bungs, are used to give an airtight seal to laboratory flasks and test tubes by fitting tightly inside the neck of the container and preventing material from spilling. Stoppers can be made of glass, cork, rubber, or silicone. They are typically designed with a conical shape, but straight, flanged, and tapered options are

SGE™ GC Septa: CS - Aijiren Tech Sci

CS Septa. PTFE-coated silicone septa for low temperature applications. Good durability, good resealing. Excellent solvent resistance; good tear resistance. Maximum temperature: 200°C (392°F)

Silicone Rubber Stopper at Thomas Scientific

Translucent silicone rubber septa:. Contain no pigments, waxes, or molding agents. Good for high heat applications (200C continuous or 400C intermittent). Autoclavable for sterile applications. Excellent resistance to deterioration due to sunlight and ozone. Compare this item.

Injection Septa at Thomas Scientific

The Merlin MicroSeal injection port septa is the perfect substitute to use in split/split less injection and SPME. It has the capacity to hold more than 2000 syringes depending upon the type of the syringe. Instrument downtime for septa changes and port liner changes is greatly minimized. It offers. Compare this item.

Rubber Septa at Thomas Scientific

use Septa 9711D45 Screw Caps (9711C10 to C45) Open-top Phenolic Screw Caps are for use with 9711D10 series Septa. Cap number and hole diameter given in listings. Tuf-bond Septa (9711D10 to D45) Thickness: 100 mils Of silicone rubber with PTFE facing 10 mils thick Septa of butyl rubber,

Selecting the Correct Septa - Growing Labs

It's vital to choose the right septa for your application. The wrong septa can compromise the accuracy of your results and reduce the lifespan of your supplies (increasing overall costs). The below chart shows some common septa materials along with their compatibilities, incompatibilities, and resealability.

Septa - Aijiren Tech Scientific

Ensure optimal performance of your GC instrument with bleed and temperature optimized Aijiren Tech™ BTO and TR-Green Septa. Made of low-bleed silicone, these septa have excellent mechanical properties, are ideal for demanding GC-MS applications, and may be used reliably up to 400 °C.

Aijiren Tech™ 8mm Autosampler Vial Septa - Aijiren Tech Sci

Description. Aijiren Tech™ Septa for 8-425 Screw Thread Caps are constructed of PTFE, PTFE/rubber, or PTFE/silicone to suit a variety of HPLC, GC and IC applications. Choose from Aijiren Tech™, Aijiren Tech™ National™, and Aijiren Tech™ Chromacol™ brands. PTFE Disk septa are chemically inert.

Bottle Septa | Aijiren Tech Scientific

Bottle Septa. Septa for bottles provide an airtight seal for bottles that prevents environmental contaminants but allows for the removal of the bottle’s contents by piercing with sharp needles. Septa bottle caps are generally available for open-top and screw caps and allow for aseptic syringe dispensing, as well as the addition of materials.

Please Feel free to give your inquiry
in the form below. We will reply you in 24 hours.
Related Products